Fantastic Wiring 2 Switches To One Light

Run the other end of that two wire cable to the light and connect the wires to it.

Wiring 2 switches to one light. One switch will be located outside on the porch and the other switch will be on the inside wall next to the door. Turn the circuit back. First let s take a look at the back of several different light switches.

If you ve mounted two switches in the same electrical box prepare two black wires. White to white copper to copper both black wires on one side of the switch and the red wire on the other. The source is at the switch box and a 2 wire cable is run to each light.

Connect the red wire to the top screw on the right side of the switch. Bond the ground wires connect the neutral wires in the switch box and share the power source for the switches then cable out to the light fixture boxes. A three way switch is not really three ways at all but it does.

How to wire 2 way light switch in this video we explain how two way switching works to connect a light fitting which is controlled with two light switches. Use the same type and gauge cable as used for the outlet circuit. Connect one end of the 6 inch wire to the top terminal of the first switch.

Secure the end of a new length of two wire cable to the second box separating the wires. Wiring two switches for two lights here two switches are wired in the same box to control two separate lights. Step 5 connect hot wire to light fixture.

You can do the work with the right tools materials and basic electrical know how. Wrap the sides of the switch with electrical tape. In the second switch box mark the other end of the white wire with black tape and connect it to the left side of the second switch.