Fine Beautiful Dyna S Ignition Wiring

This is the same ignition used by top racers over the past 2 decades.

Dyna s ignition wiring. Connect the black wire to the other end of the coil for the front cylinder. The 12 volt wire from the ignition switch is also connected to that end of one of the coils. Check that the rotor is not rubbing the modules or the wiring.

Ds2 1 for kawasaki 900 1000 four cyclinder motorcycles ds2 2 for kawasaki kz550 kz650 four cylinder motorcycles. As a stand alone ignition the dyna s is the standard of performance and reliability. Make sure that all connections are secure.

That should be the lower stud on the coil but consult your factory diagram to make sure. Install dyna s ignition coils wires. It should snap back crisply.

If you are not running a tech then the blue wire will be all that goes to the other stud it s the trigger for the coil. Ignition points do wear over time and it turn will change the ignition timing. Ds1 3 for honda gl1000 motorcycles.

For suzuki gs 400. The venerable dyna s ignition system is a time proven solution to the basic ignition needs of the vintage muscle bike. Harley davidson wiring diagrams and schematics in a single fire system the spark plugs fire independently when each piston comes to dyna s single fire ignition has the features of the dyna s but fires the front and rear cylinders independently of each other which allows accurate timing of each cylinder.

Connect the red wires from the dyna s to that same end of one of the coils. Connect the white wire to the other end of the coil for the rear cylinder. Dyna s ignition system testing inspection.